9 FNSKU Label Mistakes That Get FBA Shipments Delayed
Most labelling problems are not exotic. They come from a handful of habits that are easy to fix once you know to look for them.
1. Printing with “fit to page”
Scaling a barcode to fit a page or a different label size distorts the ratio between thick and thin bars. Always print at 100% on a label that matches the design. See our thermal printer setup guide.
2. Blurry or broken bars
Low print darkness, a dirty print head or bitmap barcodes that were enlarged all produce fuzzy edges. Use a vector barcode (one generated at print resolution rather than as a small image) and keep darkness medium-high.
3. Leaving the original barcode visible
If a scanner can see both the manufacturer UPC/EAN and your FNSKU, it may read the wrong one. Cover other scannable barcodes completely with the FNSKU label or a blank label.
4. Labelling the wrong variation
Colour and size variations often look identical in the box. Label one SKU at a time, keep unlabelled stock separate, and check the product name on each label against the item.
5. Putting the label on an edge or curve
A label wrapped around a corner or the curve of a bottle distorts the barcode. Apply it flat on one face, away from seams and folds, where it can be scanned without opening anything.
6. Glossy tape or film over the barcode
Clear tape and shiny poly bags reflect the scanner light. If the item is bagged, put the label on the outside of the bag, or use a bag thin and matte enough that the barcode underneath scans easily.
7. Using the wrong label size
A big label crammed onto a small pack ends up folded; a tiny label with a scaled-down barcode won’t scan. Pick the size for the pack, not the other way round — our label size guide compares the options.
8. Reusing an old FNSKU
Each listing and condition has its own FNSKU. If you create a new listing, change condition, or switch between Amazon and manufacturer barcodes, print fresh labels rather than reusing last month’s.
9. Not test-scanning
A ten-second scan with a phone app before printing a full run would catch most of the mistakes above. Make it a habit every time you change roll, printer settings or label design.
A quick pre-shipment checklist
- Printed at 100%, no margins, correct roll size
- Bars solid black with clean edges; text readable
- Scans back to the exact FNSKU
- No other barcode visible on the unit
- Label flat on one face, not over a seam or curve
- Product name on the label matches the item
FNSKU Label Generator draws barcodes as vector graphics and exports PDFs at the exact label size, which removes mistakes 1, 2 and 7 at the source.
Make FNSKU labels in seconds
Type an FNSKU, get a scannable Code 128 label at 2×1, 3×5 or 4×6 inches, then print or export a PDF. Works offline, no account.