FNSKU Label Generator

FNSKU Label Sizes: 2×1 vs 3×5 vs 4×6 Inches — Which to Use

Updated 25 October 2026 · 5 min read

The right label size depends on your printer, your packaging and what else you need to show on the pack. Here is how the three common sizes compare, and when each one is the sensible choice.

The short answer

What Amazon expects from a unit label

Seller guides commonly quote a range of roughly 1×2 inches up to 2×3 inches for an FNSKU unit label, and Amazon’s own label templates sit in that range. Whatever the size, the label needs the scannable FNSKU barcode, the FNSKU in text, the product name and its condition, printed in black on white, non-reflective stock. Sizes and templates do change, so check Seller Central’s current labelling page for your marketplace.

2×1 inch: the barcode-only label

This is the classic FNSKU sticker. It fits on almost any pack, it is the cheapest per label, and 2×1″ (often sold as 50×25 mm) thermal rolls are easy to buy. Because the label is small, print quality matters: keep the barcode at 100% scale and use a printer of at least 203 dpi.

Use it when: you only need the FNSKU, your packaging already carries the legally required details, or the product is small.

3×5 and 4×6 inch: product labels with MRP

Larger labels combine the FNSKU barcode with the information sellers otherwise put on a second sticker: product name, your SKU, net weight, the maximum retail price band and a “sold by” line. For many Indian sellers this replaces two stickers with one.

4×6″ is popular simply because 4×6 thermal shipping printers are everywhere. 3×5″ suits smaller boxes. If you print a large label, make sure the barcode area itself stays crisp and unobstructed, and that the label sits flat on one face of the pack.

Use them when: the pack needs MRP and product details anyway, and there is a flat face big enough to take the label without wrapping round an edge.

Side-by-side

2×1″3×5″4×6″
ContentsFNSKU barcode onlyBarcode + product details + MRPBarcode + product details + MRP
Typical stock50×25 mm thermal roll3×5 thermal roll4×6 thermal roll
Best forMost FBA unit labelsSmall boxes needing MRPBoxes needing MRP; shipping printers
Watch out forScaling blurs small barsNeeds a flat faceNeeds a big flat face

Matching the label to your printer

Whatever you choose, set the printer’s paper size to the exact roll size and print with no scaling. How to print FNSKU labels on a thermal printer walks through calibration, darkness and margins step by step.

FNSKU Label Generator outputs all three sizes with zero margins — a 2×1 PDF is exactly 2.000 × 1.000 inches — so the label lands on the sticker the same way every time.

Make FNSKU labels in seconds

Type an FNSKU, get a scannable Code 128 label at 2×1, 3×5 or 4×6 inches, then print or export a PDF. Works offline, no account.